So......this is it. I have sitting in boxes the Riva free flow exhaust, the pump shoe kit, the OCMS kit, a 6 degree timing key (thanks to Rudy) , the BOV block off, and the emission by-pass and all the parts to do the I/c reroute. On order is the R&D ride plate. Impros is doing a Stage III speed mod on the impeller and flowing the pump and putting in new bearings.

I do not have a large amount of time to actually do all of these myself. So during de-winterization, I will have the dealer do the OCMS and the timing key. I do hope during their spring inspection that when they do the compreesion check it will come back to warrant new pistons/pings and they will be more than obliged to use the 09 set. I still ave 2 years left on the extended warranty, so we shall see.

Cosmetically I will be removing all the factory annoying decals and putting on a few performance ones.

As I begin this project, I will take and post pics as I can. WIsh me luck to achieve 70!!!!!!!!

Hooah,,,,,,

ok ive read the posts about afr, lambda, etc but are there pics of the wideband tuner installed?

also is there a pic of the pressure regular line BACK to the tank installed?